WELL CASING / EAGLE LOC™/ DROP PIPE

the benefits of Using Eagle Loc™ and Drop Pipe for well Casing: A comprehensive Guide

Eagle Loc™ and Drop Pipe are two of the most popular and reliable well casing solutions available. Both offer a variety of benefits that make them ideal for a wide range of applications. In this comprehensive guide, we will explore the advantages of using Eagle Loc™ and Drop Pipe for well casing.

API 5ct L80 casing tubing Range lengths
	Range 1	Range 2	Range 3
CASING (PE/T and C/SF)
Total range length, inclusive permissible variation, max a	4.88 to 7.62 1.83	7.62 to 10.36	10.36 to 14.63 1.83
		1.52
TUBING AND CASING used AS TUBING
(PE/T and C/SF)
Total range length, inclusive Permissible variation, max a	6.10 to 7.32 b	8.53 to 9.75 c	11.58 to 12.80 d
	0.61	0.61	0.61
INTEGRAL TUBING connectionS (including IJ/PE
and IJ/SF)
Total range length, inclusive Permissible variation, max a	6.10 to 7.92 e	8.53 to 10.36	11.58 to 13.72 0.61
	0.61	0.61
pup jointS	Lengths: 0.61; 0.91; 1.22; 1.83; 2.44; 3.05 and 3.66 e
	tolerance: ±0.076
a Length variation applies to rail car shipment to the point of use and does not apply to order items of less than 18,144 kg of pipe.
b By agreement between purchaser and manufacturer, the maximum length may be increased to 8.57 m.
c By agreement between purchaser and manufacturer, the maximum length may be increased to 10.76 m.
d By agreement between purchaser and manufacturer, the maximum length may be increased to 17.72 m.0.61 m pup joints may be furnished up to 0.91 m long by agreement between purchaser and manufacturer, and lengths other than those listed may be furnished by agreement between purchaser and manufacturer.

Eagle Loc™ is a type of well casing that is made from a combination of steel and plastic. This combination of materials makes it extremely durable and resistant to corrosion. Additionally, Eagle Loc™ is designed to be easy to install and requires minimal Maintenance. It is also lightweight, making it ideal for use in remote locations.

Labels a							Calculated Mass c
			Nominal linear Mass T& C b,c	wall thick– ness				em, Mass Gain or Loss Due to End Finishing d
		Outside diameter			Inside Diameter	Drift Diameter	Plain- end	kg
								round thread		Buttress Thread
							wpe
		D	kg/m	t	D	mm	kg/m	short	Long	RC	SCC
		mm		mm	mm
1	2	3	4	5	6	7	8	9	10	11	12
13 3/8	48	339.72	71.43	8.38	322.96	318.99	68.48	15.04	—	— 17.91	—
13 3/8	54.5	339.72	81.1	9.65	320.42	316.45	78.55	13.88	—	16.44	—
13 3/8	61	339.72	90.78	10.92	317.88	313.91	88.55	12.74	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.61	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.67 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e	105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e 309.63 309.63	105.21	10.91 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.91 e	—		—
16	65	406.4	96.73	9.53	387.4	382.57	96.73	18.59	—	— 20.13	—
16	75	406.4	111.61	11.13	384.1	379.37	108.49	16.66	—	18.11	—
16	84	406.4	125.01	12.57	381.3	376.48	122.09	14.92	—	—	—
16	109	406.4	162.21	16.66	373.1	368.3	160.13	—	—		—
18 5/8	87.5	473.08	130.21	11.05	450.98	446.22	125.91	33.6	—	39.25	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.5	27.11	24.78	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.61	27.26 g 24.27 17.84	24.78	—
20	106.5	508	158.49	12.7	482.6	477.82	155.13	18.22		22	—
20	133	508	197.93	16.13	475.7	470.97	195.66	13.03		16.02	—
NOTE See also Figures D.1, D.2, and D.3.
a Labels are for information and assistance in ordering.
b Nominal linear masses, threaded and coupled (Column 4) are shown for information only.
c The densities of martensitic chromium steels (L80 types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used.
d Mass gain or loss due to end finishing; See 8.5.
e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements.
f based on 758 mPa minimum yield strength or greater.
g Based on 379 mPa minimum yield strength.

Drop Pipe is a type of well casing that is made from a single piece of steel. It is designed to be extremely durable and resistant to corrosion. Additionally, Drop Pipe is designed to be easy to install and requires minimal maintenance. It is also lightweight, making it ideal for use in remote locations.

casing pipe china high–grade Supplier,casing pipe China good manufacturer,casing pipe wholesale–Price high-quality best China,Both Eagle Loc™ and Drop Pipe offer a variety of benefits that make them ideal for well casing. they are both extremely durable and resistant to corrosion, making them ideal for long-term use. Additionally, they are both lightweight and easy to install, making them ideal for use in remote locations. Finally, both Eagle Loc™ and Drop Pipe require minimal maintenance, making them cost–effective solutions for well casing.

In conclusion, Eagle Loc™ and Drop Pipe are two of the most reliable and cost-effective well casing solutions available. They are both extremely durable and resistant to corrosion, making them ideal for long-term use. Additionally, they are both lightweight and easy to install, making them ideal for use in remote locations. Finally, both Eagle Loc™ and Drop Pipe require minimal maintenance, making them cost-effective solutions for well casing.