Tobacco Darkside Oil Burner Smoking Pipes Cheap Glass Bowl Waterpipe Water Pipe
the Pros and Cons of Tobacco Darkside Oil Burner Smoking Pipes Tobacco Darkside Oil Burner Smoking Pipes have gained popularity among smokers in recent years. These pipes, also known as glass bowl waterpipes or water pipes, offer a unique smoking experience that some smokers find enjoyable. However, like any smoking device, there are pros and…
the Pros and Cons of Tobacco Darkside Oil Burner Smoking Pipes
Tobacco Darkside Oil Burner Smoking Pipes have gained popularity among smokers in recent years. These pipes, also known as glass bowl waterpipes or water pipes, offer a unique smoking experience that some smokers find enjoyable. However, like any smoking device, there are pros and cons to using these pipes. One of the main advantages of Tobacco Darkside Oil Burner Smoking Pipes is their affordability. Compared to other smoking devices, these pipes are relatively cheap, making them accessible to a wide range of smokers. This affordability factor is particularly appealing to those who are on a tight budget or prefer not to spend a significant amount of money on smoking accessories. Another advantage of these pipes is their versatility. They can be used for smoking tobacco, as well as other substances such as herbs or oils. This versatility allows smokers to experiment with different materials and flavors, enhancing their smoking experience. Additionally, the glass bowl design of these pipes allows for easy cleaning and Maintenance, ensuring a longer lifespan for the device.
chemical Composition, Mass Fraction (%) | ||||||||||||||
grade | C | Mn | Mo | Cr | Ni | Cu | P | S | Si | |||||
Type | min | max | min | max | min | max | min | max | max | max | max | max | max | |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
H40 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
J55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
K55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
N80 | 1 | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
N80 | Q | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
R95 | — | — | 0.45 c | — | 1.9 | — | — | — | — | — | — | 0.03 | 0.03 | 0.45 |
L80 | 1 | — | 0.43 a | — | 1.9 | — | — | — | — | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 |
L80 | 9Cr | — | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | — | — | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
C90 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
T95 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
C110 | — | — | 0.35 | — | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
P110 | e | — | — | — | — | — | — | — | — | — | — | 0.030 e | 0.030 e | — |
Q125 | 1 | — | 0.35 | 1.35 | — | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.01 | — | |
NOTE Elements shown shall be reported in product analysis. | ||||||||||||||
a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched. | ||||||||||||||
b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the Wall thickness is less than 17.78 mm. | ||||||||||||||
c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. | ||||||||||||||
d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. | ||||||||||||||
e For EW Grade p110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. |