DN73 Stainless Steel Oil Well Johnson Screen Filter Tube
benefits of Using DN73 stainless steel Oil well Johnson Screen Filter Tube the DN73 Stainless Steel Oil Well Johnson Screen Filter Tube is a crucial component in the Oil and gas industry. This specialized filter tube is designed to efficiently filter out impurities and contaminants from oil wells, ensuring the purity and quality of the…
benefits of Using DN73 stainless steel Oil well Johnson Screen Filter Tube
the DN73 Stainless Steel Oil Well Johnson Screen Filter Tube is a crucial component in the Oil and gas industry. This specialized filter tube is designed to efficiently filter out impurities and contaminants from oil wells, ensuring the purity and quality of the extracted oil. There are several benefits to using the DN73 Stainless Steel Oil Well Johnson Screen Filter Tube, making it a popular choice among oil and gas Companies.
One of the key benefits of the DN73 Stainless Steel Oil Well Johnson Screen Filter Tube is its durability and longevity. Made from high-quality stainless steel, this filter tube is resistant to corrosion and can withstand high temperatures and pressures. This means that it can be used in harsh and demanding environments without deteriorating or losing its effectiveness. The longevity of the DN73 Stainless Steel Oil Well Johnson Screen Filter Tube ensures that it can be used for extended periods without needing frequent replacements, saving time and money for oil and gas companies.
| chemical Composition, Mass Fraction (%) | ||||||||||||||
| grade | C | Mn | Mo | Cr | Ni | Cu | P | S | Si | |||||
| type | min | max | min | max | min | max | min | max | max | max | max | max | max | |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| H40 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| J55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| K55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| N80 | 1 | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| N80 | Q | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| R95 | — | — | 0.45 c | — | 1.9 | — | — | — | — | — | — | 0.03 | 0.03 | 0.45 |
| L80 | 1 | — | 0.43 a | — | 1.9 | — | — | — | — | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 |
| L80 | 9Cr | — | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | — | — | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| C90 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| T95 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| C110 | — | — | 0.35 | — | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| P110 | e | — | — | — | — | — | — | — | — | — | — | 0.030 e | 0.030 e | — |
| Q125 | 1 | — | 0.35 | 1.35 | — | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.01 | — | |
| NOTE elements shown shall be reported in product analysis. | ||||||||||||||
| a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched. | ||||||||||||||
| b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the wall thickness is less than 17.78 mm. | ||||||||||||||
| c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. | ||||||||||||||
| d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. | ||||||||||||||
| e For EW Grade p110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. | ||||||||||||||
